You can either attach a regular plug to the wires at the end of the power cable or you can have it hard wired to the mains which we recommend getting a trained electrician to do for you. Also if you are unsure how to wire a plug, we would again recommend asking an electrician.

Firstly you will need to have the Night Mode setting on either Auto (where it will detect when it goes dark) or On (where it will be on continuously). This will allow the camera to turn on its infrared lights. After this you will then need to turn the PIR setting which will then turn the Floodlights on after movement has been detected.

If you click onto the Floodlight in your Hey app the select the chevrons on the bottom right of the screen, then select Siren where you turn it on or off. If you want to adjust the volume of the siren you will need to click into the 3 dots on the top right of the screen and select Siren Adjustment where you can set the volume as you please.

Yes! You can do this by clicking onto the Floodlight Camera, then selecting the 'Light' option where you can select whether to turn the lights on or off, the brightness of them and create a schedule for them if you so choose.